| Every dollar
you spend goes to keep Erlenbach Racing going. Racing is not cheap. If you see something you
want shoot me a fair offer i'm easy to work with, what have
you got to lose. Thanks for looking! Ed
Slightly
used parts
1 set RD400 1A1 cases
1 set RD400 1A1 cylinders 66mm knife edged transfers
1 1A1 charging/ignition stator assembly
1 1A1 charging system rotor
3 1A1 Crankshaft Cores (possibly sold)
1 set RD400 2V0 cases
1 set RD400 Daytona cylinders 66mm knife edged transfers
1 Daytona charging/ignition stator assembly
1 Daytona charging system rotor
1 Daytona points cam
1 Daytona airbox (externaly perfect internaly the filter top stud mounts
are broken off)
1 Daytona kick start lever (possibly sold)
1 250/350 Upper triple clamp handle bar and gauge mounts
shaved beadblasted
1 blasted nicely rattlecan painted RD250/350 swingarm
3 RD250/350 lower triple clamps
1 set 250/350 front fork lowers
1 left 250/350 front fork lower with lower fender mounts shaved ala
RD400
1 Left RD250 cyl 54.25 Bead blasted ports cleaned up
2 sets US RD250 cylinder heads (1 set bead blasted)
3 sets stock bore US RD250 cylinder (1 set bead blasted and welded for
up racing)
1 set 3.1mm 250/350/400 (DS7/R5/RD/LC) cyl base spacers (possibly sold)
1 set 397-11636-00 .5 over RD200 pistons
1 set 361-11637-02 .75 over Dykes RD250 pistons with rings
1 65.25 Pro-X RD/RZ/banshee piston with rings
1 extra set 65.25 Pro-X RD/RZ/banshee rings
1 FZ600 rear brake caliper and bracket for FZ600 swingarm
conversion
1 New in bag RD400/RZ350 EBC Clutch Spring Kit
1 Runnable Early TZ250 cylinder
2 (1 set) RD250/350/TZ250/350 Hi Performance Connecting Rod Kits used by
Top TZ
racers (Shipped from France) 225.oo
RD250A-B Street or
Track Ported Cylinders
Genuine Yamaha RD250 piston set .75mm oversize complete with piston
rings,
wrist pins, and wrist pin clips.
Fits all model RD250 and RD250LC
With out wrist pin bearings 150.oo
R5 DS7 Transmission fully rebuilt. this is a beautiful tranny. 100.oo
The difference between a trans I sell and an ebay tranny is that I
completely disassemble the trans and replace any needed parts and I know
what I'm doing.
|